Maxim 公司的MAX16836是电流稳压器,工作电压6.5V到40V,能够驱动总电流为350mA的一串或多串高亮LED(HBLED). MAX16836有可调的LED电流(从35mA到350mA),LED电流精度+/-3.5%.高压DIM引脚用来调光接口,并联工作可使LED电流大于350mA,差分LED电流检测,关断电流为35uA.主要用于汽车内部照明,汽车外部照明,急救车的告警照明,导航和海上指示灯以及通用照明等.本文介绍了MAX16836的主要特性, 功能方框图,多种调光连接图以及用于LCD背景光的多路HB LED 驱动电路等.
The MAX16836 current regulator operates from a 6.5V to 40V input-voltage range and delivers up to a total of 350mA to one or more strings of high-brightness LEDs (HB LEDs). The output current of the MAX16836 is adjusted by using an external current-sense resistor in series with the LEDs. A dimming input allows widerange “pulsed” PWM operation. Wave-shaping circuitry reduces EMI. The differential current-sense input increases noise immunity. The MAX16836 is well suited for applications requiring a high-voltage input and is able to withstand automotive load-dump events up to 40V. An on-board pass element minimizes external components while providing ±3.5% output-current accuracy. Additional features include a 5V regulated output and short-circuit and thermal protection.
The MAX16836 is available in a thermally enhanced, 5mm x 5mm, 16-pin TQFN package and in an 8-pin SO package with exposed pad. The MAX16836 is specified over the automotive -40℃ to +125℃ temperature range.
MAX16836主要特性:
+6.5V to +40V Operating Range
Adjustable LED Current (35mA to 350mA)
±3.5% LED Current Accuracy
High-Voltage DIM Pin for Dimming Interface
Integrated Pass Element with Low-Dropout Voltage (0.55V typ)
+5V Regulated Output with 4mA Source Capability
Parallel Operation for LED Current > 350mA
Differential LED Current Sense
Low Shutdown Supply Current (35μA typ)
Low 200mV Current-Sense Reference Reduces Power Losses
Wave-Shaped Edges Reduce Radiated EMI During PWM Dimming
Thermal Shutdown
Output Short-Circuit Protection
Available in Small, Thermally Enhanced, 5mm x 5mm, 16-Pin TQFN Package and in 8-Pin SO with Exposed Pad Package
-40℃ to +125℃ Operating Temperature Range
MAX16836应用:
Automotive Interior: Map, Courtesy, and Cluster Lighting
Automotive Exterior: Tail Lights and CHMSL
Emergency Vehicle Warning Lights
Navigation and Marine Indicators
General Lighting
Signage, Gasoline Canopies, Beacons
图1.MAX16836功能方框图
图2.MAX16836采用EN连接到VIN的调光
Dimming with EN Connected to VIN at a Constant Voltage and DIM Pulsed
图3.MAX16836采用DIM连接5V,EN连接到VIN的调光
Dimming with DIM Connected to V5, EN Connected to VIN
图4.MAX16836并联连接图
图5.MAX16836采用ICM7555的PWM 调光连接图
图6.MAX16836采用NTC电热调节器的LED电流热监视图
图7.MAX16836采用电流电平开关的两种亮度连接图
图8.MAX16836采用单个BJT来增加LED电流(安培级)
图9.用于LCD背景光的多路HB LED 驱动电路
